Taillights

The PDW USB-rechargeable Io taillight has two super-bright LEDs for a great value, and offers a super-quick charge time of only 2.5 hours. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding. - 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h) - Seatstay mount included - UV-proof rubber strap bracket for easy on and off included - Includes Micro USB-recharging cord

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

Emax+ 150 is NiteRider's first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike's battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes-Steady ON and varying flashes-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 150 - 6 Modes - Hardwired, Voltage 6 to 80 Volts DC - Water / Dust Resistant IP64 Rated - Weight: 75 grams - Fits 22mm-34.9mm seat posts - Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount LIGHT MODES 1) Fast Flash 2) Slow Flash 3) Disco Flash 4) Pulse Flash 5) High Steady 6) Low Steady NiteRider recommends this taillight be installed by an authorized e-bike service and repair shop.

NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. Lumina Max headlight and NiteLink Remote sold separately. - Maximum 300-lumen output - Run time: 6:00—36:00hrs - Charge time: 2:15hrs - Group Ride Mode: Be seen without distracting fellow cyclists - 2 light levels, 3 flash modes - FL1 Standard IP64 Water Resistant - 79g Includes: - Daylight visible tail light, easy on/off seatpost strap mount, and USB charging cable

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle. - Daylight Visible Flash (DVF) - 260 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off Aero seat post strap mount with quick release tab - Aero seat post strap included - Convenient USB rechargeable - Super bright Daylight Visible Flash mode - Innovative Aero shape with excellent side visibility - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Vmax+ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more! For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. - 6 Modes with Run Times: 4:30-25:30h - Lumen Output: 150 - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in last mode used)

The most innovative bike taillight ever designed, Vya Pro blends ultra-powerful output with revolutionary smart features. The piercing 100 lumen beam is easily visible over an impressive distance of 2km, even in bright daylight. The Pro version builds on Vya’s innovations with a horizontal layout with custom engineered optic providing a concentrated burst of red light ideal for road riding in fast moving traffic. What separates Vya from traditional taillights are smart auto-on/off sensors – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in for stoplights. The scientifically designed SafePulse beam pattern not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. An optional seat rail mount is a great addition to the platform to get safety lighting even higher on the bike to be more in a driver’s line of sight. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and convenient. The next evolution in bike safety, Vya Pro is unmatched in the market for its power, compact design, and commuter convenience. Features - 100 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Smart sensor technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Horizontal design with custom optic gives a powerful, concentrated burst of light to be recognizable over 2KM away – perfect for road cyclists - Impressive 6 hour runtime allows Vya to be used on multiple rides before needing a recharge, low battery status is indicated by rapidly flashing sidelights - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 100 (SafePulse) - Runtime: 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

Lezyne Ebike Super Bright Alert Taillight: Powerful, low-profile StVZO certified e-bike taillight with custom-programmed Alert Technology. It features 10 high-output emitters that provide a constant 12 lumens and then 24 lumens when deceleration is detected. Its co-molded design is constructed from durable Composite Matrix material, which provides an IPX7 waterproof rating. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Stainless steel mounting hardware is included. Compatibility: 6 – 12v input, 1.2w / 2.4w (Alert mode). Download the manual below for further installation and compatibility details. - Alert" brake light function - STVZO optimized lens - 130cm cable - Includes stainless steel hardware

The KTV Drive Pro+ Rear is a compact, aero seatpost compatible rear bike light providing up to 150 lumens and six output modes. It offers up to 20 hours of max runtime and a highly disruptive Daytime Flash mode. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, durable, rigorously tested to IPX7 Waterproofing standards, and an integrated USB stick allows convenient cable-free recharging. - Max 150 lumens / 20-hour runtime in Femto mode - Max 150 lumens / 20-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Unique aero and round seatpost compatible design - Rigorously tested to IPX7 Waterproofing standards - Integrated USB-stick for cable-free recharging - 400 mAh battery capacity

Lezyne Stick Drive Taillight: Innovative cycling taillight featuring an integrated machined aluminum Ø35.4 MM seat clamp. By replacing the seat clamp with a slender, lightweight design, the Stick Drive Seat Clamp reduces hardware and saves space—ideal for mountain bikes with dropper-style seatposts. Eight high-powered LED emitters offer top visibility and seven output modes, including a daytime flash mode (up to 30 lumens) and our Wide-Angle Optics for up to 270-degree of visibility. An innovative magnetic interface allows the light to easily detach from the mount for quick and easy charging accessibility. The light itself is housed in a co-molded Composite Matrix body that’s durable and features an IPX7 waterproof rating. A built-in USB stick allows for cable-free charging and up to 23 hours of runtime. - 30 lumen - USB rechargeable - 34.9-35.4mm seat clamp mount with magnetic clip - 2 solid and 5 flash modes

Experience the next level of cycling safety with the Strip Drive 300+ Rear light. This exceptional rear light offers ten LEDs and a maximum output of 300 lumens; it is engineered for impressive efficiency and runtime, providing the best beam pattern for optimal light dispersion in even the most challenging conditions. Plus, with an impressive 80-hour max runtime, you can rest assured that this light will last as long as you need it to. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. With seven output modes, including highly disruptive Daytime Flash modes, wide-angle optics providing 270° visibility, USB-C waterproof charging(cable not included), and a lightweight yet durable co-molded design, it's the ultimate choice for every cyclist. A versatile mounting system attaches to aero or round seatposts and recharges via a waterproof USB-C connection. - Max 300 lumens / 80-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Waterproof USB-C charging port with charge indicator - Lightweight and durable co-molded design - Maximum side visibility design - Multiple mounting options with ladder strap - Seven combined solid and flash modes - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards - 1400 mAh battery capacity

The Zecto Drive Max 400+ Rear is a high-visibility light that boasts an incredible 400 lumens of brightness. Its six combined solid and flash output modes offer versatile options for any situation. Its highly disruptive Daytime Flash mode ensures maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime and increases side visibility. The light is fitted with a patented 2-in-1 clip and strap mounting system, allowing easy attachment to handlebars or loops. It is rigorously tested to IPX7 Waterproofing standards to withstand even the harshest weather conditions. With a 1300 mAh battery capacity, the Zecto Drive Max 400+ Rear offers a maximum runtime of up to 70 hours in Femto mode. It also boasts waterproof USB-C charging(cable not included), making it easy to keep it charged and ready to go. - Max 400 lumens / 70-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2-in-1 clip and strap mounting system (Patented) - Multiple mounting options like dog collars or strollers - Six combined solid and flash output modes - Rigorously tested to IPX7 Waterproofing standards - 1300 mAh battery capacity

- Modes include High Flash, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 12 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

- Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 11 hours 15 mins - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

- Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 10 hours 15 mins - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

- Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs

Blaze MK3 With ReAKT And Peloton is a premium rear light that has all the versatility of various rear light technologies merged with a hefty run time. - Ambient Kinetic Technology (ReAKT) enables the light to automatically flare under braking and when entering areas of higher ambient light to create a contrast in brightness. Peloton mode dims rear light when a following rider's front light is detected - Optimized Mode Selector provides multiple programs for a choice of run times and modes so you can find the right one for your ride - DayBright flash pattern and side illumination for 360° visibility makes this an attractive package

Packed with more power and technology than meets the eye, the new Dice™ TL 50 tail light is engineered to stand out day and night, delivering powerful and extra-wide 50 lumen flashes. Engineered for road cyclists and commuters, its extra-wide beam maximizes your presence from afar while its low-profile flexible mount keeps secure on the seat post, including aero shapes. It even senses day and night, automatically switching to the optimal flash tempo. (Patent Pending) - Powerful 50 lumen flashes with 8 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes: Day Modes: High - Group - SteadyPulse® Day - Single Flash Day - Triple Flash Day, Night Modes: High - Group - SteadyPulse® Night - Single Flash Night - Triple Flash Night - Flashing modes emit powerful lightning-like flashes to highlight your presence in broad daylight - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - Enhanced Cycling Optics™ (ECO) expands your presence from afar with an extra-wide and long-range beam - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Low profile, water-resistant design only weighs 30 grams - Flexible mount conveniently attaches to most seat posts including aero styles RUN TIMES - High: 1:30 hrs - Group: 65 hrs - Single Flash Night: 11 hrs - Single Flash Day: 20 hrs - Triple Flash Night: 35 hr - Triple Flash Day: 55 hrs - SteadyPulse® Night: 6:30 hrs - SteadyPulse® Day: 8 hrs - CHARGE TIME: 2 hrs - MOUNTING: Seat Post - BATTERY: Built-in Li-ion - SYSTEM WEIGHT: 30g Patent pending. *Features and specs are subject to change without notice.

Made for the ultimate road cyclist, the HotrodTM 120 taillight unleashes a powerful 120 lumens of flashing output for unprecedented night and day cycling safety. High-intensity cluster-mounted array of LEDs work in unison for an extra-wide and powerful output, maximizing your presence on the demanding roads. Using Cygolite’s 24/7 Safety Technology® with exclusive solid and flashing modes to increase your safety, the new Hotrod Rear 120 includes new Bzzz Flash mode to stand out even more both day and night. Every bit the road cyclist's tail light, the Hotrod 120 uses a VersatiteTM flexible mount that conveniently attaches to most seat posts including aero styles. Performance - 120 lumen red tail light with 7 lighting modes engineered for road cyclists - Continuous array of LEDs work in unison to shine an extra-wide and powerful glow - Ultra low profile, water-resistant design only weighs 35 grams - USB rechargeable with 1:15 to 70 hours of run time, and 3 hour recharge time. Technology and Safety - Built-in 24/7 Safety Technology® gives you a powerful selection of 7 night and day modes (DayLightning® High Flash, High Steady, Group Low Steady, SteadyPulse®, Zoom, Bzzz Flash, Low Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - Zoom mode signals those around you with a gentle change in brightness - All-new on Hotrod, Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Low battery indicator alerts you when a charge is needed - Light mode memory saves the mode you're in before the light is turned off - VersatiteTM flexible mount conveniently attaches to seat posts including aerobars - Designed, engineered, and assembled in the USA RUN TIMES: - Group (low steady): 70 hr - High Steady: 1:15 hr - Zoom: 5 hr - SteadyPulse®: 5:30 hr - Low Flash: 30 hr - Bzzz Flash: 8 hr - DayLightning® Flash: 3 hr CHARGE TIME: - 3 hrs (depending on the charger used) MOUNTING: - Flexible seat post mount BATTERY: - Built-in Li-Ion SYSTEM WEIGHT: - 35g *Features and specs are subject to change without notice.

Engineered for the ultimate road cyclist, the Hotrod™ 90 unleashes a powerful 90 lumens of flashing output for unprecedented night and day cycling safety. Its cluster mounted array of LEDs work in unison for an extra-wide and powerful output, maximizing your presence on the demanding roads. Be seen all the time with 24/7 Safety Technology™, an exclusive set of solid and flashing modes to increase your safety when cycling, night and day. Every bit the road cyclist’s tail light, the Hotrod 90 uses a Versatite™ flexible mount compatible with most seat posts including aero styles. Performance - 90 lumen red tail light with 6 lighting modes engineered for use on roads and commuting - Continuous array of LEDs work in unison to illuminate an extra-wide and powerful glow - Ultra low profile, water-resistant design only weighs 35 grams - USB rechargeable, internal battery lasts up to 100 hours - Water-resistant design - 1:30 ~ 100 hr run time - System weight: 35g Technology and Safety - 6 modes: High Flash - SteadyPulse® - Zoom - Group - Low Flash - High Steady - SteadyPulse's steady beam helps motorists better gauge their distance from you while the overlapping pulses keep them alert of your presence - Sturdy and flexible Versatite™ mount attaches to most seat posts and seat stays, including aero styles *Features and specs are subject to change without notice.

Sporting an aggressive new design and the most powerful single LED taillight available, the Hotshot Pro™ 150 is engineered from the ground up to stand out in the brightest of daytime hours and at night with intense 150 lumen flashes. Exclusive 2 button design lets you fully adjust the tempo of each flash mode to maximize motorist awareness. Every bit the road cyclist’s tail light, its extra-wide beam lens maximizes your presence from afar and a specially treated internal body disperses a radiant glow to keep nearby motorists alert. Get the most out of your ride with up to 210 hours of run time. (patent pending) - Powerful and efficient single LED blasts 150 lumen flashes (90 lm steady) - Engineered to make you stand out in broad daylight and at night - Built-in 24/7 Safety Technology® gives you a powerful selection of 6 day and night modes (Steady - Zoom - SteadyPulse® - Triple Flash - DayLightning® - Random Flash) - Freely adjust the brightness of Steady mode and the flash tempo of the flashing modes with the simple 2 button interface (patent pending) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - Enhanced Cycling Optics™ expands your presence with an extra-wide and long-range beam - Specially treated internal body disperses a radiant glow to keep nearby motorists alert - USB rechargeable internal battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Compact, water-resistant design weighs only 59 grams - Seat post and seat stay mounts included - 2 ~ 210 hours of run time Patent pending. *Features and specs are subject to change without notice.

The most powerful line of single LED tail lights just got even brighter. Sporting an aggressive design and powerful output, the Hotshot Pro™ 200 is engineered from the ground up to stand out in the brightest of daytime and at night with intense 200 lumen flashes. Exclusive 2 button design lets you fully adjust the tempo of each flash mode to maximize motorist awareness. It even senses day and night, automatically adjusting the brightness of the flashing modes. Every bit the road cyclist’s tail light, its extra-wide beam lens maximizes your presence from afar, and its new low-profile flexible mount makes it easy to use on standard and aero seat posts. Get the most out of your ride with up to 210 hours of run time. (patent pending) - Powerful and efficient single LED blasts 200 lumen flashes (120 lm steady) - Engineered to make you stand out in broad daylight and at night - Built-in 24/7 Safety Technology® gives you a powerful selection of 6 day and night modes (Steady - Zoom - SteadyPulse® - Triple Flash - DayLightning® - Random Flash) - Freely adjust the flash tempo of the flashing modes and the brightness of Steady mode with the simple 2 button interface (patent pending) - All flashing modes feature Adaptive Flash™ that sense day and night, automatically adjusting to the optimal brightness - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - Enhanced Cycling Optics™ expands your presence with an extra-wide and long-range beam - USB rechargeable - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Compact, water-resistant design weighs only 54 grams - Flexible seat post mount fits most standard and aero seat posts - 2 ~ 210 hours of run time Patent pending. *Features and specs are subject to change without notice.

Engineered to stand out day and night, the Hotshot SL™ 50 delivers nearly twice the output of the original Hotshot™ with powerful 50 lumen flashes. Exclusive 2 button design lets you fully adjust the tempo of each flash mode to maximize motorist awareness. Every bit the road cyclist’s tail light, its power combines with an impressive 200 hours of run time to give you a large presence anytime and anywhere. (patent pending) - Powerful 50 lumens flashing - Built-in 24/7 Safety Technology® gives you a powerful selection of 6 day and night modes (Steady - Zoom - SteadyPulse® - Triple Flash - DayLightning® - Random Flash) - Freely adjust the brightness of Steady mode and the flash tempo of the flashing modes with the simple 2 button interface (patent pending) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - USB rechargeable internal battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Compact, water-resistant design weighs only 55 grams - Seat post mount included - 2:30 ~ 200 hr run time Patent pending. *Features and specs are subject to change without notice.

250 lumens packed into an unbelievably compact form, the all-new Hypershot 250 is the latest and greatest from the originators of the most powerful line of LED bike tail lights. This powerful dual LED tail light puts out ultra-bright 250 lumen flashes in an extra-wide and long-range beam pattern that makes cyclists stand out both day and night. The 2 button design on the Hypershot lets cyclists control the speed of each flash mode and the brightness of the steady mode to their preference. And with 7 unique lighting modes and a run time range of 2 to 200 hours (yes, really), you won’t go unnoticed. (patent pending) - Powerful 250 lumen flashes to be seen day and night - Unique 2-button design lets you adjust the speed of each flash mode and the brightness of the Steady mode - Dual LED optics throws a long-range, extra-wide beam - Daytime visible flashes make you stand out on busy streets - 7 lighting modes for day and night use (Steady - Zoom - SteadyPulse® - Bzzz Flash - Triple Flash - DayLightning® Flash - Random Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - Zoom mode signals those around you with gentle changes in brightness - All-new Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Hard seat post mount and seat stay mount securely attaches onto seat posts and seat stays - Light mode memory saves the mode you're in before the light is turned off - Durable and weighs only 60 grams - IP64 water-resistant for use in all weather conditions - USB rechargeable with 2 to 200 hours of run time and 3 hours fast charging - Low battery indicator alerts you when a charge is needed Patent pending. *Features and specs are subject to change without notice.