Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$19.99
Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions.
- Attachments: Rear rack deck
- Material: Engineering grade polymer
- Max Load: Limited to rack max loading rating
- Size: 32 x 9.4 x 6.1cm
- Weight: 230g / 8.11oz
Compatibility
- Fits rear rack without top plate and spring clip,
- Rear rack width 90mm - 120mm,
- Rack tubes, 10mm to 12mm diameter
- Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets
*Racktime is a registered trademark of tubus carrier systems GmbH.
$274.99
The adjustable cargo rail is the behind the scenes workhorse that makes the Haul LT electric bike magic. Set them up for whatever you need to get more into it. Strap on your cargo bags, panniers or use them as passenger handlebars; with the adjustable cargo rail, the Haul LT is your oyster.
- Customizable support for Cargo bags, panniers with vertical mounting points for locks, bottle cages, and other Globe electric bike accessories.
- Designed for frictionless compatibility with Haul LT.
- Intended for use with the Cargo Side Bags or passengers, not a loaded platform.
- Able to be used as handlebars for passengers.
- 3 width options and 4 height settings.
- QR pins for easy adjustment or removal.
- Requires tools for assembly not included with purchase.
$99.99
These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter.
*Third-party panniers not tested for guaranteed compatibility
- Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT*
- *Not compatible with Globe Pegs due to shared mounting location.
- Accepts most standard bicycle panniers, such as the Specialized Coolcave.
- Includes two pannier adapters (one for each side of the rack) and all required hardware.
- 8kg (18lb) load capacity per side.
- Additional tools required for rear installation (not included).
$199.99
The Globe Haul LT electric bike running boards will help keep your passengers and your cargo rock steady as you zip through your day. This is support where you need to help create a stable ride and get more into it.
- 2 full-length running boards
- Designed for frictionless compatibility with Haul LT
- 66 lbs max capacity per side
- Includes all required tools for assembly
- Sustainable, bamboo platform with grip tape top
$29.99
Add a rack to your frame, even if you don’t have rack mounts. This innovative design allows a standard rack to be bolted directly to the thru-axle for a clean and simple look. It's made from lightweight aluminum to keep weight down and durability high, and it features threads inside of the axle to install the lower mounting bolts.
- 12x148mm axle fits all carbon and alloy Specialized mountain bike frames with Boost rear hub spacing.
$11.99
Our Seatpost Clamps with rack mounts provide a stable spot to mount your rear rack stays to on bikes without seatstay braze-ons. Very handy. Also great for light mounts, a saddlebag stabilizer, or anything else you problem solving people tend to dream up. Unless you’re thinking about towing a jet ski with it. Let’s be reasonable.
Tech Details
- Available in 31.8 mm and 34.9 mm diameters
- Alloy clamp
- Stainless steel bolt
- Threaded to accept standard M5 bolts
$12.99
Additional pivot bearing for flexible use of the Quick-Rack on a number of bikes.
Do you wish to use a second bike with your Quick-Rack? That’s no problem at all because the additional pivot bearings allow you to swap quickly between your bikes.
$8.99
This mounting set allows you to attach your Saddle-Bags to other bicycles.
For all Saddle-Bag, MudRacer and Micro models.
- 1 mounting set for Saddle-Bags, including screws
$5.99
Universal shoulder strap for ORTLIEB bags. Includes D-rings, plastic shoulder pad and carabiners. For Bike-Packer and Sport-Packer models from 2009 and for all Back-Roller City, Sport-Roller City and Gravel-Pack models.
DETAILS:
- 1 shoulder strap with carabiners
$9.99
- Stretch web secures those hard-to-hold items
- Great for any rack
- 4 easy-to-handle molded hooks attach anywhere
- Dimensions 11" x 11"
$14.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost.
CONSTRUCTION
• Aluminum
$19.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm
- Designed to maximize bottle capacity on small frame bikes and dual suspension frames
$22.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Three slots for additional adjustments over the B-RAD 2 base
- Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
$24.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Long, four-slotted mount allows two, smaller bottles to be mounted in-line
- Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$29.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options.
- Mounts to bottle bosses, or to the B-Rad base for additional carrying options
- Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches)
- Cradle strap is 40mm wide and 350mm long for supporting loads
$24.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back.
- Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames)
- 6061-T6 aluminum brackets, stainless hardware
- Weight (no hardware) – 20g
- Maximum load 1700g
- Designed to carry two bottles or accessories off of one B-RAD base
$24.95
B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items.
- Mounts to the B-Rad base mount (not included
$39.95
The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it.
- Mounts to the B-RAD system or on its own
- Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)
$9.20
By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers.
- 2 Phillips head frame bolts in 1.5-inch (38mm) length
- 2 Standoff spacers in 1-inch (25.4mm) length
$12.00 - $15.00
Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris.
- Mounts to the back of the fork crown via brake bolt or through bolt
- Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers
- Use Sheldon's Fender Nuts to work with recessed brake bolts
- Rust resistant and includes all required brackets and hardware
- Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes
$7.95
Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!
$24.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
$7.95
QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags.
- Material : Injected Nylon
- Weight: 30g / 1.06 oz
$26.95
Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units.
- Fits up to 1-inch handlebars
$22.95
Fast and easy attachment of Topeak handlebar bags.
- Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)
$11.95
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames).
- If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
$19.95
Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.
$11.00
Extend the life of your Dummy bags with this replaceable wear patch.
$70.00
Surly's Dummy Deck provides a light, durable platform for cargo bikes, built to Xtracycle's Longtail standard — including the Big Dummy, of course. The Dummy Deck is stamped from 4mm-thick aluminum, chosen for its strength, durability, and recyclability, and it bolts directly to Surly Dummy Rails to stiffen and stabilize the whole system (it's also compatible with Xtracycle V-racks by using Xtracycle's SuperHooks). It features cut-outs for routing straps and cordage, a mounting hole for a rear light bracket, accessory-mounting holes, and countersunk holes for SuperHook hardware.
Page 1 of 3
Next page