Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Seatposts

$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel

$41.99
• Aluminum
• Coil spring provides plush suspension
• Adjustable pre-load design
• Micro-adjust seat clamp
• 450 grams

$269.99
- Internal Routed, Infinitely Adjustable Design
- Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System
- Durable 3D Forged Head - With 7075-T6 Forged Clamp
- Featherlight Thumb Actuation - Industry Leading
- Intelligent Keyway System - Ensures Minimal Play
- Easiest Installation - Cable Head Attaches At Base
- Cold Weather Approved - Tested Down To -20C.
- 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware
- Remote Position: On handlebar
- Cable Routing: Internal
- Offset: 0mm
- Clamp Type: Standard, double bolt
- Seat Post Material: Aluminum
- Seat Post Weight: 510g

$249.99
The Terra seatpost is the best choice for riding mixed terrain, gravel, or rough roads because it smooths the ride by allowing significant vertical compliance. The secret to this ride smoothing post is in the composite layup that we utilized. By utilizing composites with varying elongation characteristics at specific locations in the post, we enabled vertical compliance for comfort while retaining requisite strength for mixed terrain riding, all at a sub-200 gram weight (27.2 x 330 x 0).
- 18mm Vertical Compliance (20mm offset / Full Extension)
- 194 grams (27.2 x 330mm x 0)
- Advanced composite construction delivers ride-smoothing vertical compliance.
- Available in four sizes: 27.2mm x 330mm x 0 offset, 27.2mm x 380mm x 0 offset, 27.2mm x 330mm x 20mm offset, 27.2mm x 380mm x 20mm offset
- No-Fault crash replacement policy. Lifetime warranty
- Proven clamp design ensures ease of adjustment and slip-free performance.
- System Weight Limit: 275lbs / 125kg

$861.00
Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components.
- Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch.
- Clean, simple and fast to install. No hoses to route, no fishing required.
- Updated internals for faster return speed in all conditions.
- New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost.
- SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components.
- Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.

$199.99
The patented Dual-Position Seatpost lets you ride a true aero position on a standard road bike, without sacrificing your normal road position. Along with the Quick-Release Aerobars it provides the benefits of a triathlon or time trial bike without the additional bike or price tag. The key to riding powerfully and comfortably is proper saddle position and since you can switch between road and aero positions on-the-fly while riding, you can always choose the best riding position for every part of your ride.
Benefits:
- Transform your current bike—switch from road to aero position on the bike you already own
- Ride with ease—no more time and energy wasted switching from road bike to aero bike
Details:
- Linkage design lets you switch between road and aero positions seamlessly while riding
- Choose the best position for every single climb, flat, or descent
- Maintain proper leg extension in both road and aero positions
- Saddle moves forward 50mm, corresponding to approximately 4 degrees of effective seat tube angle change
- Aero road riding position optimized for proper handling on a road bike
- Simple, durable two-bolt saddle clamp allows infinite saddle tilt adjustment and reliable clamping
- 16mm rearward setback (road position)
- Check technical specifications for compatibility

$308.99
Saddle Up
Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height and a 25g weight savings from the previous version. This post will treat you right.
Less is More
New, patent-pending FOX seat clamp design dramatically reduces stack height, allowing you to fit more travel into a shorter space.
Full Coverage
Proven FOX-designed internals provide infinite height adjustment, but perhaps more importantly—even easier serviceability.
No-Sweat Installation
Mounting a saddle and getting your saddle position dialed is easy thanks to the user-friendly seatpost clamp.
Brilliantly Uncomplicated
Uses standard shifter cable and housing. You know, just to keep things real. Oh yeah—it's also 25g lighter than the previous version.
- Compatible with Matchmaker
- Includes post only
- Mechanical lever actuation
- Head Type: Zero Offset—2 Bolt
- Weight: 520g

$149.99
Profile's Canta Seatpost is made of high-modulus carbon for lightness, exceptional vibration damping, and a beautiful appearance. It boasts a super-secure 2-bolt forged-aluminum seat clamp that lets you easily dial in the seat angle to perfection.

$299.99
Get your saddle down and out of the way and up your technical skills with a game-changing dropper. The Koryak Internal dropper routes cables through the frame for a clean, snag-free assembly.
- AL-7000 series aluminum
- Infinite travel 150mm
- Internal cable routing

$68.99
- 6061-T6 construction w/forged alloy head
- 45mm adjustable preload suspension travel
- 2-Bolt Zero Offset head clamp
- Up to 300 lb rider weight
- EN MTN safety approval
- 385g (27.2mm x 350mm)

$28.00
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- 0mm offset

$199.99
The latest generation Thudbuster LT is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design.
By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made.
- Travel: 90mm
- Weight: 750g (31.6mm)
- Max Rider Weight: 250lbs

$199.99
The latest generation Thudbuster ST is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, and additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design.
By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made.
- Travel: 50mm
- Weight: 580g
- Max Rider Weight: 330lbs

$285.00
- Designed using SRAM Exogram technology
- Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately)
- Matte Black finish
- Seat Post Diameter: 31.6mm
- Seat Post Length: 400mm

$285.00
- Designed using SRAM Exogram technology
- Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately)
- Matte Black finish

$172.00
The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types.
- Distinctive Zipp cosmetics
- Unidirectional Carbon fiber tuned for ride comfort
- Lightweight clamping system
- Lifetime warranty

$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts.
- Material: 6061 aluminum
- 2-bolt adjustability
- Minimum insertion length: 90mm

$70.00
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets.
- Convenient finger adjustment of saddle angle
- Unidirectional carbon shaft, forged aluminum head
- No rider weight limit
- 5 year Whisky warranty
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"

$105.00
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7.
- Carbon shaft absorbs trail chatter
- UD carbon shaft, forged aluminum head

$44.99 - $58.99
WeThePeople's Socket Pivotal seat post is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and comes in the perfect color and size to match your bike. Plus, there's a 17mm socket head built into the bottom of the post for park-side adjustments to your wheels.

$55.00
The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings.
0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment.
30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.

$64.00
TruVativ's Stylo T30 Seatpost is constructed with a 1-piece 3D-forged 7050 aluminum tube to be light and strong. The sturdy dual-bolt head provides loads of adjustability so you can fine tune your saddle position.

$249.00
Syntace's HiFlex full carbon seatpost is centered around a highly technical carbon design that evenly distributes rider load as well as damps vibrations without loss of control. Its extra-deep 52mm bottom clamp offers optimal rail support while a shallow 30mm top clamp allows for extra fore-aft adjustment. The two-bolt micro adjust clamp offers precise saddle angle adjustments and features bolts arranged in line with the direction of bump forces for increased strength Ideal for anything from road to mountain.
- Improved vibration damping and directional stability
- Bob-damping mechanism for full suspension bikes
- Compatible with most Carbon rails
- Weight: 212g
- Max. Height: 310mm
- Min. Height: 40mm

$16.99
Stolen Thermalite Pivotal Seatpost. Thermalite is proprietary material made with Nylon 66 base w/ 50% longer glass fiber infusion. Thermalite posts are 30% lighter than the current Alloy posts on the market.
- Dupont Nylon 66 with 50% longer glass fiber infusion
- 1/3 lighter than any alloy post on the market
- Compatible with all Pivotal seats
- Weight: 2.8oz.

$225.00
This is the first seatpost that’s compliant AND aerodynamic—a total win, win. We initially developed the Pavé seatpost for the all-new Roubaix, and it’ll make a fantastic addition to your Tarmac SL6. Of course, it’s also designed to make fine-tuning your saddle position a breeze with a single-bolt adjustable head and two setback options.
- FACT carbon construction paired with a D-shaped seatpost that's compatible with the 2020 Roubaix and Taramc SL6.
- Engineered to have the saddle move in a perfect arc, aka a back & downward motion.
- Setback: 20mm/0mm
- Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt.
- Length: 380mm/450mm
- Approximate Weight: 209g

$186.99
$250.00
25% Off
This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options—0mm and 20mm.
- Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.
- FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7.
- Setback: 0/20mm.
- Sleek Di2 integration hides the Di2 junction box inside.

$300.00
- Aerodynamic FACT carbon construction that’s compatible with the 2019 Venge
- Sleek Di2 integration hides the Di2 junction box inside
- Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt

$50.00
The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it.
- 6061 Aluminum shaft
- Two-bolt head
Page 1 of 4
Next page