Pedals

PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes

Dual-sided "Pop-Up" clipless pedal with AL6061 die-cast body and CNC platform - LSL sleeve bushing and sealed bearing - 9/16" CNC machined Chromoly spindle - Shimano SPD style cleat with 15º float - Platform size: 105mm x 103mm

Low And Lean Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on. Round And Round We Go Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable. Ride Don't Slide Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck. Look Good Ride Good Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like. Pedal Envy More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):14.5 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 114 x 101 - Weight: 355g

The Stamp 1 Gen 2 pedals build upon the Stamp legacy with a true concave body design for enhanced on-trail confidence, trusted Igus internal components for durability, and a new one-piece pin design for maximum grip and easy pin replacement. Crafted with an uncompromising commitment to quality, the updated Stamp 1 boasts a robust nylon composite body and inherits the tried-and-true internals from the award-winning Stamp 7 flat pedals, keeping you supported lap after lap. - Thin, concave profile - 13.5mm to 15.5mm pedal body height - One-piece replaceable traction pins, 10 per pedal - Upgraded, fully serviceable IGUS bearings and seal system - Forged SCM 435 Chromoly Steel spindle - Optimal size-specific surface area - Platform dimensions: 114 x 114mm - Large recommended for shoe sizes: 10-15 (US M) // 43.5-49 (EU)

Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)

- 100% SDG DNA in the design of these pedals - Utilizes a flat profile which allows optimal grip for flat pedal shoes - Composite body design - Minimal 17mm pedal body height maximizes the pedal feel - 105mm x 110mm Platform - Ramped and undercut traction pad - 18 pins, replaceable, bottom loaded - Bearing/bushing design for maximum durability. Fully rebuildable pedal design - Cro-Mo axle

LOOK Trail Grip pedals with Activ Grip by Vibram rewrite performance and personality rules for off-road riding. Unique, mountain peak-evolved, composite stud and rubber lug tread inserts give brilliant bike control and slip free security without trashing your shoes or your shins. Race-bred bearings and four switchable colors deliver smooth style. - Technology: Flat pedals + LOOK Activ Grip by Vibram - Body: Composite - Traction: Vulcanized Rubber Activ Grip + Composite studs - Spindle: Chromoly+ - Surface area: 107x103mm - Weight (pedal): 265g - Weight (pair): 530g

The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"

While staying true to the original Twisted PC’s style, the Twisted PRO offers a significantly larger body shape, slimmer height and more concave while still being built around a traditional loose-ball bearing configuration. Features: - High-strength Nylon composite - 12 oversized pins per side - Traditional looseball bearings - Chromoly spindle - High-strength plastic composite - Wider & longer pedal body - Larger concave area - Slimmer profile Specs: - Spindle: 9/16" - Width: 104mm - Length: 98mm - Weight: 14.6 oz (pair)

The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 6 adjustable pins per side for grip - Traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 52mm q-factor for maneuverability on tight trails - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system

- Pedal body made of ruggedly durable engineering-grade thermoplastic - LSL sleeve bushing and sealed bearing - 9/16" CNC machined Chromoly spindle - 10 M3-8mm replaceable pins per side - Platform size: 113mm x 105mm - 350g per pair

Specialized's Boomslang Platform Pedals are insanely thin, yet still wickedly strong. A tapered outside pedal edge provides maximum grip and ground clearance, while the super low-profile design—a mere 10mm at the center—is like a direct telepathic line from your body to the bike. Custom undercut pins provide incredible traction and are simple to remove, and should one break during your ride, each pedal carries four hidden pins for easy replacement. - Super slick, patent pending, spindle design - Super low-profile design; 10mm thickness at center - Custom undercut pins provide “clip in” style grip and easy removal - Pedal body carriers 4 hidden pins for easy replacement of broken pins - Tapered outside pedal edge for maximum grip and ground clearance - Large foot platform for modern day DH, 110x108mm

Odyssey JC/PC Pedals are designed with replaceable pedal bodies, pins, and nuts. - No bearings, adjustable bushing tension - Two-piece plastic bodies with replaceable metal pins and CroMoly spindles

Get ready to fly high with the Krypto DH pedals. Built tough with its CNC'ed aluminum body and self-lubricating bushings, this pedal makes a big statement on the trail with full laser graphics and premium finish. Ten strategically placed pins keep you in maximum control. - Body: CNC-machined 6061 Aluminum - Axle: CNC-machined Cro-Mo - Bearings: Ultralight self-lubricating sealed bushings - Replaceable pins - Size: 117mm x 110mm - Weight: 208 grams (each) - Dimensions: 11 x 20 x 7 cm

With loads of traction, sure-footedness, and premium control, Specialized's Bennies Platform Pedals are ready for everything from freeride madness to trail riding. They're made of a rugged, yet lightweight concave aluminum body with 24 replaceable pins for maximum grip. Durable chromoly axles and sealed cartridge bearings mean they're built to last. - 430 grams (pair) - Width x Length: 100 x 105mm - Thickness: 17.30mm in the center/19mm at each end

Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep these pedals spinning smooth. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams

- CNC aluminum body - Sealed bearing - Toe clip compatible - Reflectors included - 9/16-inch spindle

- Pedal body made of ruggedly durable engineering grade thermoplastic - Sealed bearing and LSL sleeve bushing - 9/16" CNC chromoly spindle - 113mm x 105mm x 18mm concave platform for large feet - M3-9mm replaceable pins - 360g per pair - Size: 9/16" - Material: Composite - Style: Platform Pedals

- Galvanized steel pedal body - 2-piece block platform - Boron axle - Plastic blocks w/ integrated reflector - 553g pair

Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years

Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability. - 380 grams (pair)

Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 475g

You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't. Specifications: - spindle material: forged scm 435 chromoly steel - body material: A380 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - cleat: premium brass cleats with shims included - weight: 395g per pair

- One-piece ABS resin body - Molded pins - 320g pair

Competition-oriented and customizable for refined fit, feel, and power transfer. Details - Durable alloy body - Durable cast steel wings - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - Hex alloy endcap and bashguard - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system Specs - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 52mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 320g per pair - Wing Material: 17-4PH stainless

Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip. - Premium brass cleats with shims included - Q-factor: 57mm - Release angle: 15° / 20° - Forged 435 Chromoly steel spindle - 300 series stainless steel spring - 5-year warranty - 331g per pair

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair

A modern take on the classic platform pedal style. DMR provides a large pedal body area and DU bushing system aimed to provide riders with control, durability and serviceability. - 15 x 95 x 25mm (L x W x H) - 8 replaceable M4x0.7x8 corner pins and 12 fitted non-replaceable pins per pedal - Designed with grease ports; 'V-lube' grease syringe included with pedals - Double concave pedal body for control and stability - Classic parallelogram shape - 9/16"

The Stamp 1 Gen 2 pedals build upon the Stamp legacy with a true concave body design for enhanced on-trail confidence, trusted Igus internal components for durability, and a new one-piece pin design for maximum grip and easy pin replacement. Crafted with an uncompromising commitment to quality, the updated Stamp 1 boasts a robust nylon composite body and inherits the tried-and-true internals from the award-winning Stamp 7 flat pedals, keeping you supported lap after lap. - Thin, concave profile - 13.5mm to 15.5mm pedal body height - One-piece replaceable traction pins, 10 per pedal - Upgraded, fully serviceable IGUS bearings and seal system - Forged SCM 435 Chromoly Steel spindle - Optimal size-specific surface area - Platform dimensions: 100 x 100mm (Small) - Platform dimensions: 114 x 114mm (Large) - Small recommended for shoe sizes: 3-10 (US M) // 37-43.5 (EU)